Panasonic Pbx Unified Maintenance Console Keygenguru

Posted on by  admin
  1. Download Pbx Unified Maintenance Console
Panasonic pbx unified maintenance console keygenguru center

  • Issue with voice on LAN issue with PBX.

    All, we have Panasonic IP-PBX which has digital phones and IP phones both connected to it. IP phones are in two sites (site A,

  • Can you provide a compatible telephone system in Houston?

    Hi, we have an office in Houston (77043) with 5-10 users and we're looking to deploy a telephone system for them. The system

  • New Used Phone System

    My company recently purchased a used phone system from one of our clients. The PBX is a panasonic kx-ncp500 and the phones are

  • No one can hear user on phone Panasonic KX-DT33

    One of my users has changed something on his phone and no one can hear him when they call him or when he calls

    He can here the

  • Possible to route IVR system to external numbers on pbx kx ns500?

    I have a panasonic Pbx kx ns500 I need to configure IVR functionality, such that on receiving a call , and the user making a

  • Panasonic PBXUnified Maintenance Console freezes in Windows 10

    Anyone using Panasonic PBXUnified Maintenance console software (V7.8.1.1) on Windows 10?

    I can use it fine from a keyboard, and

  • Panasonic KX-TDA200 No Caller ID

    I recently installed a Panasonic KX-TDA200 system in my church. I have Charter Spectrum for the incoming lines and they do have

  • Music on Hold won't stop playing through speakers

    Afternoon! I am banging my head against the desk here. Today I finalized a project that I had been working on for a while and

  • Is it time to implement VLANs & QoS?

    Couple of our departments have recently moved into new premises which is just over 100yards away from HQ and both sites are

  • PBX - KX-NCP Block a Number from Calling?

    We have a PBX - KX-NCP using the unified maintenance console. I am a PBX noobie and have no ideal where I would make this change

  • New Phone System

    I am pretty sure I have read recommendations for Shore Tel on SW. I am not sure why you're trying to move away as all these phone

  • PBX + Fax Lines = You're going to have a bad time

    TL:DR - when faxing we're getting a busy signal in the middle of transmission, and then the call hangs up.

    So let me just give a

  • Cant assign extension # to phone

    Hey spice heads noob here when it comes to phone systems in general looking for some guidance.

    We have a PBX/PRI phone setup here.

KX-NCP Maintenance Console cannot connect due to lock

With over 1050 Panasonic Telephone System Installations completed in England, we are fast becoming one of the largest independent Panasonic Dealers, being able to impliment both simple and complex Panasonic Telephone System Solutions. Below you will find all of our Panasonic Downloads. Same as everyone else! Thanks for posting this! Damn scheisty dealers don't want to allow us to administer our own phone system. Hopefully this will help alleviate that issue.

KX-NCP Maintenance Console cannot connect due to lock

Download Pbx Unified Maintenance Console

PROBLEM DESCRIPTION:
We have a Panasonic KX-NCP1000 phone system. We use the Panasonic PBX Unified Maintenance Console (MC) via LAN to programm it in interactive mode. Recently the user session which was connected to the KX-NCP1000 was broken due to a problem with the client computer. Now we are not able to reconnect to the KX-NCP system anymore. It seems there is some kind of lock which we cannot reset.
SYMPTOM ERROR:
E030103 Invalid Password or Model Type Error
WHAT DID WE TRY:
1. We have double checked the LAN connection settings (which was documented), so PBX model, IP, port and password are 100% correct. We even tried to connect via serial port, but no connection was possible.
2. We have tried to reset the KX-NCP (normal reset via button, power off, etc, NO initial reset to prevent loss of programm data). Result: MC connection still not working
3. We have tried to backup the system programm data from the SD card, change the DBSYS file offline in Maintenance Console batch mode and restart the KX-NCP again with the changed data. Result: Restart of KX-NCP was successfull with the changed data, but MC connection still not working
QUESTION:
How to reset the lock on the Maintenance console connection at the KX-NCP?
Help would be appreciated.
Best regards,
System installer @ Coenradie

Comments are closed.